Micro-pins for Membrane Fixation from OMNIA

Micro-pins in titanium alloy for the fixation of any kind of bioresorbable and non-resorbable membranes. Micro-pins are available in two lengths: 3 mm and 5 mm. 3 mm micro-pins are used for most applications, while 5mm micro-pins allow a better stabilization in case of very soft bones. The special design of the Micro pin with crestal coils guarantees greater fixation of the membrane and simplifies its removal with the help of a special screwdriver.

Advantages:

  • Available lengths: 3 mm and 5 mm
  • Tissue comfort ensured by the chamfered profile of micro-pin pan head
  • Micro-thread for bone fixation
  • Hexagonal socket Ø 0.88 mm for easy removal
  • Handy autoclavable blister pack
  • New reinforced geometry

Micro pins are delivered in a handy, sterilizable blister pack making their management, storage and clinical application easier. Each blister pack is sterile and contains 10 micro-pins, either 3 mm or 5 mm long.

Micro-pins for Membrane Fixation from OMNIA

A Micro pin is disposable and cannot be reused, as this could cause the onset of infections or results in the failure to maintain the technical features.

Sterilization
Micro pins are supplied in sterile conditions (sterilization by Ethylene Oxide); this condition is ensured when the box is undamaged. If the box is damaged or there is partial use of micro pins contained in the rigid support, the specialist can re-sterilize the same following these steps:

  • Pack the rigid support with the Micro pins which are still unused (Warning: the used Micro pins must be eliminated – risk of infection) in an envelope (medical paper).
  • Sterilize with steam in an autoclave at 121°C for 15 minutes or 134°C for 10 minutes.

Full Set

  • Blister pack containing 10 titanium micro-pins, 3 or 5 mm long
  • Titanium screwdriver for the insertion and removal of micro-pins, Ø 0.88-mm
  • Straight positioning tool for micro-pins allows an easy and precise insertion of micro-pins by gently striking them with a surgical dental mallet.

Micro-pins for Membrane Fixation from OMNIA



Leave a Reply

Your email address will not be published. Required fields are marked *

*

*